community microgrid
community microgrid
C&I Energy Storage System


PowerCombo-20C2H1200K is a battery energy storage system with nominal power of 1000kW capacity of 2,064kWh, which is ideal for large scale C&I, micro-grid, distributed renewable energy stations, and other application scenarios. With modular & all-in-one design, 6 sets of S373-24P14, PCS, fire fighting system, environmental control system and BMS are integrated inside a 20ft container. With independent string management and isolated cooling system, it allows system has higher energy density while better safety and reliability guaranteed.

community microgrid


  • Cloud-based dispatch operation platform;
  • Active balancing and DC coupling, maximum efficiency more than 99%;
  • Independent string management to avoid parallel mismatch;
  • Adopts modular design that is easy to update, expand and maintain, reducing the cost needed for maintenance;
  • Isolated hot/cool air dust design, with the temperature difference between batteries less than 3℃;
  • Provides status notifications, alarm alerts and real-time response protection strategy in cases of emergencies to ensure system reliability and safety;
  • UL9540A, UL1973, IEC62619, CE, UN38.3 certificated.

Download details

community microgrid
C&I Energy Storage System

Capacity Compensation

In the case that the user-side load is higher than the capacity coming from the grid, PowerCombo BESS employs a dispatch strategy to automatically compensate capacity to the power distribution system and improve the voltage quality on the user side.

C&I Energy Storage System

Load Shifting

Store energy in off-peak hours and discharge it during peak hours, to reduce electricity costs by partially replacing expensive peak electricity.

C&I Energy Storage System

Sizable Income

Establish good interactions with the power grid partners by getting involved in demand response programs. Contribute to reduce peak load and get incentives from the grid.

C&I Energy Storage System

Smooth Output Curve

Ensure that renewable energy can be easily dispatched. PowerCombo BESS will discharge energy when in need, to shave load spikes and reduce the use of grid power during peak hours.

C&I Energy Storage System

Better Utilization of Renewable Electricity Generation

Fully leverage the flexible energy storage system to increase the consumption of electricity generated from renewable energy sources and reduce the curtailment of wind and solar power,to alleviate the stress on the grid during peak and valley hours.

C&I Energy Storage System

Backup Power Supply

PowerCombo BESS can be used as a backup power supply in the event of a sudden power outage. The discharge mode will be instantly switched on to offer support to critical loads and safeguard the normal operation of critical loads.

C&I Energy Storage System

Three-tier battery management mechanism

Mitigate the points of failure and prevent batteries from over-charging, over-discharging and over-current

C&I Energy Storage System

High-quality battery materials

Selecting batteries from top global brands with TUV and UL certifications

C&I Energy Storage System

More effective thermal management solutions

Conducting simulation analysis on the operating temperature of batteries under complex physical conditions

C&I Energy Storage System

Real-time protection

7*24h panoramic online monitoring and multilevel emergency response strategies

Item 20C2H1200K
DC Data Cell type Lithium Iron Phosphate (LFP)
Cell life cycle 80% Retention with 5,000 Cycles @ 0.5C 25℃
Cell spec 3.2V/280Ah
Rack rated energy capacity 2,064kWh
Rated voltage 1,228V
AC Data Rated AC power 1,200kW
Rated grid voltage 690V
Maximum AC power 1,320kW
General Data Dimension w/o clearances(L*W*H) 6,058*2,438*2,591mm
Weight of whole system <26.5t
Degree of protection IP54
Operating temperature range -20~40℃
Max working altitude 4,000m/13,123ft
Communication interfaces RS485, Ethernet, GPRS
Certificates UL1973, UL9540A, IEC62619, CE , UN38.3, UN3536

Thanks for paying attention to Cubenergy, the leading BESS & Microgrid manufacturer headquartered in Shenzhen, China.
The global service centers of Cubenergy in Los Angles & Munich are for your real-time demand.
Please contact us and have your unique energy solution right now.

Please provide a valid name.
Please provide a valid Email.
Please provide a valid phone.
Please provide a valid country.
I understand and agree to the use and transfer of my personal information by Cubenergy according to Cubenergy's Privacy Policy

Please agree to privacy policy first